CBSE Class 10 Sample Paper 2022 for Multiskill Foundation Course Term 1

CBSE DEPARTMENT OF SKILL EDUCATION
MULTI SKILL FOUNDATION COURSE (SUBJECT CODE 416)
CLASS X (SESSION 2021-2022)
BLUE PRINT FOR SAMPLE QUESTION PAPER FOR TERM -1
Max. Time Allowed: 1 Hours Max. Marks: 25

PART A - EMPLOYABILITY SKILLS (05 MARKS):

UNIT NO. OF QUESTIONS
NAME OF THE UNIT
NO. (1 MARK EACH)
Communication Skills-II
1 2
Self-Management Skills-II
2 2
Information and Communication Technology Skills-II
3 2

TOTAL QUESTIONS 6 Questions
NO. OF QUESTIONS TO BE ANSWERED Any 5 Questions
TOTAL MARKS 1 x 5 = 5 Marks

PART B - SUBJECT SPECIFIC SKILLS (20 MARKS):

UNIT NO. OF QUESTIONS
NAME OF THE UNIT
NO. (1 MARK EACH)
Workshop Engineering Techniques
1 15
Energy & Environment (Session 1 to session 3 & Session 5 – Total 4
2 session) 12

TOTAL QUESTIONS 27 Questions

NO. OF QUESTIONS TO BE ANSWERED 20 Questions

TOTAL MARKS 1 x 20 = 20 MARKS

416-SQP-X-Term1(2021-2022) 1

CBSE DEPARTMENT OF SKILL EDUCATION
MULTI SKILL FOUNDATION COURSE (SUBJECT CODE 416)
CLASS X (SESSION 2021-2022)
SAMPLE QUESTION PAPER FOR TERM -1
Max. Time Allowed: 1 Hours Max. Marks: 25
General Instructions:
1. Please read the instructions carefully
2. This Question Paper is divided into 03 sections, viz., Section A, Section B and Section C.
3. Section A is of 05 marks and has 06 questions on Employability Skills.
4. Section B is of 15 marks and has 20 questions on Subject specific Skills.
5. Section C is of 05 marks and has 07 competency-based questions.
6. Do as per the instructions given in the respective sections.
7. Marks allotted are mentioned against each section/question.
8. All questions must be attempted in the correct order

SECTION A

Answer any 5 questions out of the given 6 questions on Employability Skills (1 x 5 = 5 marks)

1. Which of the following is NOT an element of communication within the communication 1
process cycle?
(a) Channel
(b) Receiver
(c) Sender
(d) Time

2. __________ is an example of verbal communication 1
(a) E-mail
(b) Letter
(c) Phone call
(d) News letter

3. In SMART goals, what does ‘S’ stand for? 1
(a) Scientific
(b) Sincere
(c) Specific
(d) Simple

416-SQP-X-Term1(2021-2022) 2

4. ___________ Can be defined as our emotional, mental, physical and social reaction to 1
any perceived demands or threats.
(a) Motivation
(b) Stress
(c) Inspiration
(d) Feedback

5. Which one of the following shortcut keys is used to paste a file? 1
(a) Ctrl + c
(b) Ctrl + p
(c) Ctrl + v
(d) Ctrl + x

6. A strong password consists of ___________, numbers and special characters. 1
(a) Letters
(b) Name
(c) Birth date
(d) Mobile number

SECTION B

Answer any 15 questions out of the given 20 questions (1 x 15 = 15 marks)

7. Least count of Vernier caliper is ____________ 1
(a) 0.002 mm
(b) 0.2 mm
(c) 0.02 mm
(d) 20 mm
8. _________ is used to draw horizontal lines parallel to the length of the drawing board. 1
(a) Compass
(b) Protractor
(c) T-Square
(d) Compass box

9. Lock nuts are installed to lock the spindle of the ______________ 1
(a) Micrometer
(b) Welding rod
(c) Compass box
(d) Mini drafter

10. What are the different Drawing Paper sizes? 1
(a) 1,2,3,4
(b) 1-A,1-2
(c) A0,A1,A2,A3,A4
(d) A1,A11,A111,A1111

11. Name major two types of welding. 1
(a) Arc & Gas
(b) Gas & Oxygen
(c) MIG & Oxygen
(d) Spirit & Arc

416-SQP-X-Term1(2021-2022) 3

12. Name the first method of "5 S" in Workshop. 1
(a) Seiton - Tidiness
(b) Seiri –Sort
(c) Seiketsu - Standardization
(d) Seiso- Hygiene
13. ______________ provides final finishing to construction. 1
(a) Painting
(b) Scrubbing
(c) Plastering
(d) Varnishing
14. Threading Die is used for____________ on the cylindrical part of iron rods. 1
(a) Threading
(b) Tapping
(c) Drilling
(d) Reaming
15. Defects like cracks, incomplete penetration weld cavity; etc. can be identified by _____ 1
(a) Stethoscope Test
(b) Ammonia per sulphate Test
(c) X – Ray Test
(d) Scanning
16. Top view and front view drawn in ____________projection method. 1
(a) Isometrics
(b) Orthographic
(c) Circular
(d) Hidden line
17. Isometric view is a ______________ dimensional view and it looks realistic. 1
(a) One
(b) Six
(c) Nine
(d) Three
18. Tap is a _____________ tool used to make threads in the inner part of a job. 1
(a) Cutting
(b) Measuring
(c) Drafting
(d) Marking
19. Which objects conduct electricity only in certain situations or mediums? 1
(a) Semiconductor
(b) Conductor
(c) Insulator
(d) Metal
20. Which device is used to convert the DC voltage from the battery into AC voltage? 1
(a) Rectifier
(b) Transformer
(c) Inverter
(d) Motor
21. The distance by which the piston moves in an up-down or upward downward direction 1
inside the cylinder is called the ____________ of the pump.
(a) Stroke
(b) Torque
(c) Centrifugal force
(d) Rotation

416-SQP-X-Term1(2021-2022) 4

22. What is the SI unit of energy? 1
(a) Watt
(b) Joules
(c) Volt
(d) Ampere
23. Which motor works on both AC and DC supply? 1
(a) Induction motor
(b) Linear motor
(c) Universal motor
(d) Three phase induction motor
24. Which device is used to store electric energy temporarily? 1
(a) Capacitor
(b) Transistor
(c) Resistor
(d) Thermistor
25. _______________ are used to trap the solar energy received and convert it into a 1
usable form of energy like electricity.
(a) Solar Panels
(b) Magnetic strips
(c) Metals panels
(d) Carbon Fiber strips
26. Biogas has 55-70%__________, 30-40% ___________ and traces of hydrogen sulphide. 1
(a) oxygen, nitrogen
(b) carbon, methane
(c) methane, oxygen
(d) methane, nitrogen

SECTION C
(COMPETENCY BASED QUESTIONS)

Answer any 5 questions out of the given 7 questions (1 x 5 = 5 marks)

"Students were playing on the playground because they wanted to do extra practice for inter-school
competitions. One solar lamp was present on the playground, but it wasn't in working condition.As per the
student's request, the principal called the electrician to repair a lamp. He followed safety norms while
repairing the lamp, replacing the faulty neutral wire from the circuit. He suggested that the lamp pole must
be repaired as it was rusted and cracked because the lamp is on an open field. He proposed to call the
welder. From his suggestions, the teacher called the welder to repair the lamp pole. He started repairing it
using a welding machine. But the spark of the welding process bothered his eyes. The welder's eyes
became red and teary, but he kept doing the task and repaired the lamp pole on the ground."
27. What can we do to prevent the lamp pole from rusting? 1
(a) Plastering
(b) Painting
(c) Welding
(d) Drilling
28. Which cell is used to converts solar energy directly into electrical energy? 1
(a) Dry cell
(b) Photovoltaic cell
(c) Battery
(d) Magnet

416-SQP-X-Term1(2021-2022) 5

29. Write the use of welding machines? 1
a) Welding machine is used for drilling and threading, polishing.
b) Welding machine is used for polishing and drilling operations.
c) Welding machine is used for welding operations.
d) Welding machines are used for polishing and welding.
30. Why was the lamp not glowing, even though Phase wire was connected; only the 1
neutral wire was faulty?
(a) Need to complete the circuit
(b) It requires earthing
(c) Fluctuation in voltage
(d) Fluctuation in current
31. What would be the reason for turning out the welder's eyes red and teary? 1
a) He didn't wear the safety goggles.
b) He was staring at job.
c) He may not sleep.
d) He is too happy
32. Suggest safety equipment for a welder to safely conduct operations? 1
(a) Safety apron, Welding machine, Helmet
(b) Welding machine, Hand screen, Shoes
(c) Helmet, Hand screen, Welding rod
(d) Safety apron, Safety goggle, Hand screen
33. What is the type of solar energy? 1
(a) Non-renewable
(b) Renewable
(c) Nuclear
(d) Fossil fuel

416-SQP-X-Term1(2021-2022) 6